Break out harness for 964 engine.

14 x testlead for:

1. Starter signal
2. Speed sender (only type 01 harness)
3. Resistor blower
4. Oil press
5. Back up light supply
6. Back up light from switch
7. NTC Blower
8. NTC Blower
9. Oil press (warning
10. #30
11. Charge light / excitation
12. #30
13. Engine fan
14. Ground

Not to be missed in every Porsche workshop!

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

In the meantime you can take measurements via the standard 4mm banana socket plugsCan be used for each 911 or 930 from 1970 till 1989.

Comes with a detailed drawing showing function of each wire.

As original colored wiring.

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Handmade in Holland