Porsche 911 1983 SC

Inline diode (1 Amp) art.no 911.617.108.01

Inline diode 1A ..

18.00 €

Inline diode (10 Amp) art.no 911.617.106.02

Inline diode 10A (commonly used for window wiper)..

45.00 €

Inline diode 10A art.no: 911.612.106.01

Inline diode 10AFor rear window wiper etc..

27.00 €

Instrument bulb holder (single spade) BA7S art.no 999.632.007.00

One prong bulb holder for instrument lightingKnown as: bulb socket with 1 flat plug / bulb socket 1-..

5.00 €

Instrument bulb holder (single spade) BA9S for H4 headlight assembly art.no BAS9KRO

Bulb holder for H4 headlight assembly with screw terminalBulb holder for: J - BA9S BayonetBulb holde..

7.00 €

Instrument bulb holder T4 art.no 999.632.014.00

For dashboard lighting, fan heater panel, ignition switch etcDiameter: 8mmLength: 19,5mm..

8.00 €

Interior lighting harness for Porsche 911/912 Coupe art.no: 901.612.035.20

Harness for interior lights. Connects to main harness on right side under window.As original colored..

49.00 €

Interior lighting harness for Porsche 911/912 Targa art.no: 901.612.035.41

Harness for interior lights. (Targa version) Connects to main harness on right side under window.As ..

53.00 €

Male pin set (large) 14 pcs art.no 50253921K

14 piece male terminal set.Length 19mmDiameter 4mmUsed for injector connections, powerseats, rear wi..

26.00 €

O2 Sensor Control System Harness 911SC 930.16 art.no:911.612.173.01

Oxygen sensor control system (closed loop) wiring harness for the US 911SCThis harness runs from the..

600.00 €

O2 sensor replacement connector with high quality screened cable art.no O2.CONNCABLE

Replica O2 sensor connector with 40cm green shielded wiring.Comes with heatshrink and 2 x heat self ..

42.00 €

O2 sensor replacement connector with screw terminal art.no O2.CONNTERM

Replica O2 sensor connector with screw terminal M4 Eyelet terminal included..477971252..

37.00 €

Piggyback terminal spade-spade art.no 111.971.511

Piggyback terminal spade-spade (6.3mm)..

5.00 €

Pre connection of front fusebox frame G.model art.no PRECONN.ORIG.FUSEB.G

Select this option if you want us to pre-connect the ordered wiring looms to your original G model f..

82.00 €

Pre connection of front fusebox frame G.model to Classic Retrofit fuse-panel. art.no PRECONN.CR.FUSEB.G

Select this option if you want us to pre-connect the ordered wiring looms to a new Classic Retrofit ..

60.00 €

Push /pull switch single pole art.no PUSHPULLSWITCH

Vintage look single pole push /pull switch.Can be used for several functions , rear wiper etc..

11.00 €

Push-on connector 12 way art.no 999.652.142.40

Used for several connections in almost any classic Porsche.12 way strip. (can be cut in single piece..

15.00 €

Push-on connector art.no:999.652.151.40

Used for early turn signal wiring (near the fusebox) but also other years...

5.00 €

Relay socket for 12v relay art.no RELAYSOCKET

Standard relay socket for 12v relay(You will also require latching 6.3 x 0,8 terminals for this prod..

4.00 €

Repair cable for distributor 6 pole CDI-HKZ box art.no REP6CDI

Green shielded distributor cable from 6 pole CDI box connector to distributor in engine harnessIt ca..

115.00 €