Connecting the world of classic Porsche

Break out harness for wiper engine harness.

14 x testlead for:

  1. Starter signal
  2. Oil temp Sportomatic / #30 (for 911  1984-1989)
  3. Oil temp
  4. Oil press
  5. Back up light supply
  6. Back up light from switch
  7. Air valve Sportomatic
  8. Gear lever Sportomatic / Cylinder head temp for 911 1984-1989)
  9. Oil press (warning) / #30 for 911 1984-1989)
  10. Warm up regulator 
  11. Charge light / excitation
  12. Rpm signal (1970-1974)
  13. Fan signal
  14. #30 

Not to be missed in every Porsche workshop!

Using our breakout harness you can easily take measurements and locate any faults.

All wires are marked indicating the specific function of each wire.

You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.

In the meantime you can take measurements via the standard 4mm banana socket plugsCan be used for each 911 or 930 from 1970 till 1989.

Comes with a detailed drawing showing function of each wire.


As original colored wiring.

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Handmade in Holland

Write a review

Note: HTML is not translated!
    Bad           Good

Breakout harness engine for engine 911-930 1970-1989 art.no: BRHENG

  • Brand: Kroon
  • Product Code: BRHENG
  • Availability: In Stock
  • 440.00 €


Tags: Breakout harness test lead